1. Process parameters: 50pcs/min power supply users shall provide independent plant equipment and be responsible for the connection of external pipe lines.Electrical source needs to open the door to one close to 29 kw with voltage: AV380V frequency: 50 + 1 hz, 3 phase 5 lines 2 interface compressed air interface Φ 6 trachea 3 can maximum power consumption 20 kw (wiring according to the power connect) compressed air 0.5 ~ 0.6 MPa, provide conditions of use space equipment distance walls shall not be less than 700 mm at room temperature and humidity: 25 ºC + / - 5 ºC, humidity:Floor load bearing requirements: ≥750Kg/m indoor use site, surrounding no flammable and explosive gas, liquid or solid ground level floor flatness: ≤5mm/2m 5 safety protection: leakage protection switch, emergency stop button;Operation protection: vacuum manual operation switch, anti-positive pressure explosion box structure;Warning function: sound and light alarm and touch screen warning function.



Equipment acceptance
1. The seller shall notify the buyer 5 days before shipment upon completion of installation and commissioning. The buyer shall provide qualified materials upon receipt of the delivery letter, arrange technical personnel to come to the seller's site for acceptance according to the technical agreement.
2. Materials used for acceptance test shall meet the requirements of this agreement;
3. The acceptance inspection shall be conducted by the engineering and technical personnel designated by both parties and the acceptance inspection report shall be signed jointly.



7.Installation, commissioning and training
1. After the equipment is shipped to the buyer's factory, the buyer shall be responsible for the installation and debugging of the equipment;During debugging, the seller shall arrange door-to-door service if the problem is supported remotely by the seller first and still cannot be solved;The buyer shall comply with the installation site regulations specifically instructed by the seller in the training;
2. After the equipment is shipped to the buyer, the equipment shall be placed in the designated area by the buyer, and the overall level shall be corrected by the buyer's staff. The installation and debugging shall be completed within two weeks if the buyer provides debugging materials;
3. After the installation and debugging of the equipment, the seller shall conduct technical handover and operation and maintenance training for the operators and equipment maintenance personnel of the buyer.




4. The seller shall provide free training for relevant personnel of the buyer.Contents include:
(1) machine assembly training:  the training of mechanical personnel for the assembly and maintenance of equipment, usually during the process of mechanical assembly, the buyer shall send engineers to the manufacturer to master the basic specifications, components, characteristics, etc.;
(2) variety conversion training:  corresponding to the training of rapid variety conversion;
(3) mass production training:  dealing with various problems during mass production.Usually, the seller's personnel will conduct one-week operation follow-up training on the buyer's site, including normal use of equipment, maintenance, fault analysis and troubleshooting, operation safety and emergency procedures.



 Equipment quality assurance and after-sales service
1. The warranty period of the equipment shall be 12 months from the date of formal acceptance of the equipment. In case of failure caused by our company's responsibility, the warranty and parts shall be delivered free of charge by our company (conditions not specified in the specification shall not be subject to this limitation). 
2. Within five years after the expiration of the warranty period, the seller shall still be responsible for the repair and maintenance of the equipment, but shall only charge reasonable labor costs and reasonable transportation costs. The seller shall only charge the cost of the accessories involved in the replacement and purchase of the equipment.Upon receiving the failure notice from party a, the seller shall implement the warranty obligation, respond within 8 hours and provide solutions within 24 hours to reduce the loss of the buyer.If other parts are needed for maintenance, the seller shall assist in purchasing, installing and debugging, and solve problems. 




Other instructions
1. The seller and the buyer shall keep confidential any technical data and documents provided by the parties, and shall not transmit or disclose to any third party by any means without the permission of the other party.
2. This technical agreement and its annexes shall serve as the basis for equipment manufacturing and acceptance inspection and shall be equally valid as the sales contract.
3. This technical agreement is made in duplicate, with each party holding one copy. It shall come into force after being signed and sealed by both parties.
4. Matters not covered herein shall be separately settled through negotiation by this technical agreement.
 

Package and shipping and work shop:

 

About us

Dongguan city Jinyao precision Equipment co., LTD is one of Enterprise combining develop, produce and sale. Established in 1980, already have 30 years experience to produce: precision Hot-air drying oven; IR/UV deliver drying equipment; environmental test equipment; printing machine; automation industrial equipment etc.

Our company always keep the aims that provide high quality product; quick service attitude and the great design. We keep the company spirit that has advance technology and high quality team. Our product receive a lot of client trust, and stand firmly front of others.

 

Dong Guan Yutsai Precision Device Enterprise LTD. is registered capital achieve ten million RMB. It has 4800 square meters factory. More than three million RMB fixed assets. Value of output achieve 24million RMB each year.

We has the steady domestic clients such as: Foxconn, HuohYow, Fu Brothrt Industrial Company, HuaXin technology company, PuYao group etc. It's all about more than 500 company include domestic ,foreign and military enterprises. We also has the long-term relationship with Thailand, India and England.

The company toward higher, farther, more perfect operating system. the Taiwan Head Company as the axis, and we make efforts in mainland market development.

 1. Can you customize the product?

 

      Yes, we can customize any products according to customer's requirements

.

2. Which payment terms are you doing?

 

      PayPal, West Union, T/T, (100% payment in advance.)

 

3. Which shipment is available?

 

      By sea, by air ,by express or as your requirement.

 

4. Which country you have been exported?

 

      We have been exported to many countries, all most all around the world, like Malaysia, Vietnam,

 

 Thailand, United States, France, Spain, Mexico, Dubai, Japan, Korea, Germany, Porland Etc.

 

5. How long is the delivery time?

 

      It's about 15-30 days.


Contact  Address :

Company name:Dongguan city Jinyao Exactitude Equipment Co., Ltd
Address: Jingfu Road No 36, xiabian village, changan town Dongguan , China